360 Sprint
v1Summary of recent changes
Initial rules from track.
Spec sheet
- Governing body
- DODC
- Notes
- Max RPM 20,000, no Gen 1s; ROAR approved software only; 4-5mm bullets allowed; RR no toe-out (no more than 90 deg of chassis); no battery hangover
- Motor type
- Spec brushless
- Motor turn
- 13.5T
- Spec motor
- Hobbywing 13.5 fixed timing
- ESC
- Hobbywing Justock
- Blinky mode
- fixed
- Max voltage
- 8.44V
- Spec tire
- Open (2.2 buggy wheels)
- Body
- Sprint body; 7x7 top wing, 4.5x3 front wing required
- Chassis
- Purpose-built/conversion offset chassis (CW, GFRP, Ghost, Velocity)
1.Electronics
Hobbywing 13.5 fixed timing motor and Juststock ESC. Max RPM: 20,000 (NO Gen 1s allowed). ROAR approved software only per applicable ESC.
2.Servo
Any servo is allowed.
3.Battery
Any MAH, any "C" Rating. Any style connector or 4mm-5mm bullets allowed. Max battery voltage 8.44v. Battery is allowed to be on left side or center, if it is not 100% on the chassis (NO HANGOVER); if running stock buggy chassis, the battery must be in the stock location.
4.Chassis
Any purpose built/conversion car offset chassis is allowed (I.E. CW, GFRP, GHOST, VELOCITY, ECT.).
5.Suspension
Any small bore, big bore shocks or mix of the two. Limiters or bump stops on shocks are allowed. Stock or aftermarket stops on shocks are allowed. Any combo of pistons are allowed. Adjustable rear arms are allowed. Right rear must be no more than 90 degree of chassis (NO TOE OUT).
6.Transmission
Any transmission that fits securely in the chassis is allowed (I.E. standup, laydown or layback).
7.Tire
OPEN TIRE (must be on 2.2 buggy wheels).
8.Body
7x7 top wings are required for top wing, 4.5x3 for front wings. All body panels must be on the car in question. Both wings, both side panels, nose piece and tail tank. Headers, tail tank and guard, nerf bars and front bumpers must be on the car!
9.Note
For more in-depth rules, please refer to the DODC rules regarding this class because that is what will be enforced.