Mini Mods (Indoor)
v1Summary of recent changes
Limestone Raceway indoor rules (9-22 revision).
Spec sheet
- Notes
- 16T pinion stock; battery max 2200mAh 7.4V 60C, must be soft case; no additional weight; open LC factory springs.
- Motor type
- Stock / sealed
- Spec motor
- LC Racing Red Can 4500KV (L6048)
- Battery chemistry
- LiPo
- Cells
- 2S
- Spec tire
- Stock LC SC wheels/tires (L6003), stock buggy wheels/tires allowed
- Body
- Modified body resembling UMP/IMCA (max 18-1/8"L x 10"W x 5"H)
- Chassis
- 1/14 LC Racing EMB-SC
1.Chassis
1/14-scale LC Racing EMB-SC.
2.Body
Modified body resembling stock-appearing UMP and/or IMCA-sanctioned bodies. Overall max length 18-1/8", width 10", height 5". Roof max length 6", width 6-1/2", rake 1"; no wind channels on the roof line; no rear roof spoiler. Side door panel max length 11-1/2", height 3". Spoiler max chord 1". Deck max rake 1" (measured at front and back of the side door panel from the bottom of the chassis).
3.Drivetrain
Everything stock out of the box unless otherwise specified. ESC, motor, and gearing (16-tooth pinion) must be stock. ESA stock settings besides voltage cutoff. Red Can 4500KV motor (L6048). No carbon fiber upgrades. Rear dog bones may be upgraded to CVD (#L6126). Aluminum upgrades allowed: front spindle L6083, rear hub L6084, front spindle carrier L6085, bellcrank L6086, wheel hex L6143.
4.Springs
Open LC factory springs: front L6117 (1.1mm), L6137 (1.2mm), L6139 (1.3mm); rear L6111 (1.0mm), L6136 (1.1mm), L6138 (1.2mm), L6197 (1.3mm).
5.Wheels & Tires
Stock SC wheels and tires (L6003). Stock buggy wheels and tires allowed on any corners (L6230/L6229 white, L6250/L6251 yellow, L6252/L6253 black). No ghosting or bald tires.
6.Battery
Max 2200mAh, 7.4V, 60C. Must be soft case.
7.Weight & Body Mount
No additional weight allowed. Rear body mount: Izzy's 3D-printed (L6196), Mike's rear bumper / Bat wind mount (L6020/L6196), or LC Racing factory mount (L6262/L6020).